Hyundai i-30: Body (Interior and Exterior) / Body Side Molding
Repair procedures
Replacement
[Rear door side weatherstrip]
1.
Loosen the rear door checker (B) mounting bolt...
Components and components location
Component Location
1. Rear spoiler
Repair procedures
Replacement
•
Put on gloves to prevent hand injuries...
Other information:
Repair procedures
Inspection
1.
With the washer motor connected to the reservoir tank, fill the reservoir
tank with water.
•
Before filling the reservoir tank with water, check
the filter for foreign material or contamination...
The SRS consists of the following
components:
(1) Driver's front air bag module/
Driver’s knee air bag module
(2) Passenger's front air bag module
(3) Side air bag modules/
Side impact sensors
(4) Curtain air bag modules
(5) Rear Retractor pre-tensioner
(6) Retractor pre-tensioner assemblies
(7) Air bag warning light
(8) SRS control module (SRSCM)/
Rollover sensor
(9) Front impact sensors
(10) Side pressure sensors
(11) Passenger’s front air bag
ON/OFF indicator
(12) Passenger’s front air bag
ON/OFF switch
The SRSCM continually monitors all
SRS components whilst the ignition
switch is ON to determine if a crash
impact is severe enough to require
air bag deployment or pre-tensioner
seat belt deployment...
Categories
(1) Driver’s door power window
switch
(2) Front passenger’s door power
window switch
(3) Rear door (right) power window
switch
(4) Rear door (left) power window
switch
(5) Window opening and closing
(6) Automatic power window
(7) Power window lock switch
read more