Inside rearview mirror Before you start driving, adjust the rearview mirror to the centre on the view through the rear window. WARNING Make sure your line of sight is not obstructed.
(1) Driver’s door power window switch (2) Front passenger’s door power window switch (3) Rear door (right) power window switch (4) Rear door (left) power window switch (5) Window opening and closing (6) Automatic power window (7) Power window lock switch The ignition switch must be in the ON position to be able to raise or lower the windows.
Engine oil and filter The engine oil and filter should be changed at the intervals specified in the maintenance schedule. If the vehicle is being driven in severe conditions, more frequent oil and filter changes are required. Drive belts Inspect all drive belts for evidence of cuts, cracks, excessive wear or oil saturation and repl
â– Type A â– Type B 1. Loosen the pin-type retainers of the under cover and then remove the undercover. 2. Reach your hand into the back of the front bumper. 3. Disconnect the power connector from the socket. 4. Remove the bulb-socket from the housing by turning the socket counterclockwise until the tabs on the socket align