Hyundai i-30: Windows / Remote window closing function

Hyundai i30 (PD) 2018-2025 Owner's Manual / Convenient features of your vehicle / Windows / Remote window closing function

Hyundai i30. function

You can still control the window movement with the engine turned off by pressing the door lock button (1) for more than 3 seconds.The window moves (up), as long as you press the door lock button. The window movement stops, when you release the door lock button. The hazard warning lights blink 3 times, when the window is completely closed.

Information

The remote window closing function may abruptly stop, when you move away from your vehicle during the operation. Stay in close proximity of your vehicle, whilst monitoring the window movement.
One of the windows may stop operating, when the window is interrupted by certain force. However, the other windows will keep operating. Thus, you should make sure that all windows are closed, and that the hazard warning lights blink 3 times.

Manual windows

To raise or lower the window, turn the window regulator handle clockwise or counterclockwise. WARNING When opening or closing the windows, make sure your passenger's arms, hands and body are safely out of the way...

Panorama sunroof

If your vehicle is equipped with a sunroof, you can slide or tilt your sunroof with the sunroof control lever located on the overhead console. The ignition switch must be in the ON position before you can open or close the sunroof...

Other information:

Hyundai i30 (PD) 2018-2025 Service Manual: RCV Control Solenoid Valve

Description and operation Description RCV (Recirculation Valve) Control Solenoid Valve is installed on the cooling pan motor top and operates the RCV actuator which controls the by-pass passage of the turbo-charger compressor. When the throttle valve is closed during engine running [Tip-out], crash noise of the impeller will occur because of rapid increasing of the boost pressure...

Hyundai i30 (PD) 2018-2025 Service Manual: Wheel

Repair procedures Hub nut tightening sequence 1. Tighten the hub nuts as follows. Tightening torque : 107.9 - 127.5 N.m (11.0 - 13.0 kgf.m, 79.6 - 94.0 lb-ft) • When using an impact gun, final tightening torque should be checked using a torque wrench...