Hyundai i-30: Engine Mechanical System / Intake and Exhaust System

Oil Level Gauge & Pipe

Repair procedures Removal and Installation 1. Remove the oil level gauge (A). 2. Timing chain cover (A)...

Air Cleaner

Components and components location Comoinents 1. Air cleaner upper cover 2. Air cleaner element 3. Air cleaner body 4...

Other information:

Hyundai i30 (PD) 2018-2025 Service Manual: Smart Key Unit

Components and components location Components No Connector A Connector B Connector C 1 - IGN 2 Relay output Battery signal 2 SSB Switch 1 input C CAN (Low) - 3 Driver door antenna switch input C CAN (High) Immoblizer antenna power 4 - B CAN (High) Driver out side handle antenna power 5 - B CAN (Low) Assist out side handle antenna power 6 - SSB Illumination (orange) Bumper antenna power 7 RPM Input - Interior antenna 1 power 8 Start signal feedback input SSB Illumination (+) output Interior antenna 2 power 9 clutch switch input ESCL enable output Interior antenna 3 power 10 - Battery power - 11 Starter relay output IGN 1 Relay output - 12 Power 1 ESCL COM - 13 SSB Switch 2 input EMS COM ESCL (-) output 14 Assist door antenna switch input - Immoblizer antenna ground 15 - SSB Illumination (-) output Driver out side handle antenna ground 16 Clutch switch input SSB LED Output Assist out side handle antenna ground 17 ESCL unlock swtich input SSB LED IGN Output Bumper antenna ground 18 Wheel speed sensor input External buzzer Interior antenna 1 ground 19 ACC Input - Interior antenna 2 ground 20 IGN 1 ESCL (+) output Interior antenna 3 ground 21 Brake switch input - 22 ACC Relay input GND Power 2 Schematic diagrams Circuit Diagram Repair procedures Removal Smart Key Unit 1...

Hyundai i30 (PD) 2018-2025 Owner's Manual: Air bag non-inflation conditions

In certain low-speed collisions the air bags may not deploy. The air bags are designed not to deploy in such cases because they may not provide benefits beyond the protection of the seat belts. Front air bags are not designed to inflate in rear collisions, because occupants are moved backward by the force of the impact...