Hyundai i-30: Body (Interior and Exterior) / Front Door
- Components and components location
- Repair procedures
- Front Door Trim
- Front Door Inside Handle
- Front Door Window Glass
- Front Door Module
- Front Door Outside Handle
- Front Door Latch
- Front Door Latch
- Front Door Belt Outside Weatherstrip
- Front Door Belt Inside Weatherstrip
- Front Door Side Weatherstrip
Repair procedures
Replacement
•
Put on gloves to prevent hand injuries...
Components and components location
Components
1. Front door
pull handle cover
2. Front door trim
3. Front door belt inside weatherstrip
4. Front door quadrant inner cover
5...
Other information:
Hyundai i30 (PD) 2018-2025 Service Manual: High Mounted Stop Lamp
Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear spoiler. (Refer to Body - "Rear Spoiler") 3. Remove the high mounted stop lamp assembly (A) after loosening the mounting screws...
Hyundai i30 (PD) 2018-2025 Service Manual: Front Glass
Repair procedures Removal • In order to remove the front glass, use the tools shown in the following figure: [Tooling Diagram] ① Square wire ② Insert-type wire grip • Insert and affix square wire ① into the insert hole of the wire grip ②...
Categories
- Manuals Home
- 3rd Generation i30 Owners Manual
- 3rd Generation i30 Service Manual
- Tyre pressure monitoring system
- Engine coolant
- Auto door lock/unlock features
- New on site
- Most important about car
Warning light and message
When the High Beam Assist (HBA)
System is not working properly, the
warning message will come on for a
few second. After the message disappears,
the master warning light (
)
will illuminate.
Copyright © 2025 www.hi30.net