Hyundai i-30: Clutch System / Clutch Master Cylinder
Removal
[Gasoline 1.0 T-GDI]
1.
Remove the snap pins (A) and the regulator (B).
•
Do not spill brake fluid on the vehicle it may damage
the paint if brake fluid does contact the paint, wash
it off immediately with water...
Components
[ISG or EPB Apply Type]
1. Clutch pedal
2. Clutch master cylinder
3. Stroke sensor
[ISG or EPB None Apply Type]
1...
Other information:
Repair procedures
Replacement and Air Bleeding
•
Never remove the reservoir tank cap when the engine is hot.
Serious scalding could be caused by hot fluid under high pressure
escaping from the radiator...
Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the outside rear combination cover.
3.
Remove the outside rear combination lamp assembly after loosening the
bolts...
Categories

(1) Driver’s door power window
switch
(2) Front passenger’s door power
window switch
(3) Rear door (right) power window
switch
(4) Rear door (left) power window
switch
(5) Window opening and closing
(6) Automatic power window
(7) Power window lock switch
read more