Hyundai i-30: Restraint / Airbag Module
Description and operation
Description
•
Driver can control the passenger airbag operating Condition (Enable
or Disable) by using this PAB ON/OFF switch...
Components and components location
Components
1. Driver Air
Bag (DAB)
2. Steering Wheel
3. Clock Spring
Description and operation
Description
•
Driver Air Bag (DAB)
DAB is installed in the steering wheel, and electrically connected to
the SRSCM via clock spring...
Other information:
Repair procedures
Removal
1.
Remove the fuel pump.
(Refer to Fuel Delivery System - "Fuel Pump")
2.
Disconnect the fuel pump motor connector (A) and the fuel sender connector
(B)...
Specifications
Specification
Item
Specification
Type
Hall effect sensor
Output signal
High: 11.8 - 16.8 mA
Low: 5.9 - 8.4 mA
Description and operation
Description
•
Components location : DCT (Dual Clutch Transmission)
•
Function
The input shaft speed sensor is important in that it detects the input
shaft RPM and sends this information to the Transmission Control Module
(TCM)...
Categories
Seat belt warning
Driver’s seat belt warning

■ Instrument cluster
As a reminder to the driver, the seat
belt warning light will illuminate for
approximately 6 seconds each time
you turn the ignition switch ON
regardless of belt fastening.
read more