Hyundai i-30: BCM (Body Control Module) / Specifications
Hyundai i30 (PD) 2018-2024 Service Manual / Body Electrical System / BCM (Body Control Module) / Specifications
| Specifications |
|
Items |
Specifications |
|
Rated voltage |
DC 12V |
|
Operating voltage |
DC 9 - 16V |
|
Operating temperature |
-22°F to 167°F (-30°C to 75°C) |
|
Dark current |
SMK : 3mA / Keyless : 4mA |
Other information:
Hyundai i30 (PD) 2018-2024 Owner's Manual: Vehicle weight
Two labels on your driver’s door sill show how much weight your vehicle was designed to carry: the Tyre and Loading Information Label and the Certification Label. Before loading your vehicle, familiarize yourself with the following terms for determining your vehicle's weight ratings, from the vehicle's specifications and the Certification Label: Base Kerb Weight This is the weight of the vehicle including a full tank of fuel and all standard equipment...
Hyundai i30 (PD) 2018-2024 Service Manual: Fuel Pump
Repair procedures Inspection [Fuel Sender] 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the fuel pump assembly. 3. Using an ohmmeter, measure the resistance between terminals 1 and 3 of sender connector (A) at each float level...
Categories
- Manuals Home
- 3rd Generation i30 Owners Manual
- 3rd Generation i30 Service Manual
- Engine coolant
- Auto door lock/unlock features
- Drive mode integrated control system
- New on site
- Most important about car
Door locks
Operating door locks from outside the vehicle
Mechanical key
Turn the key toward the rear of the vehicle to unlock and toward the front of the vehicle to lock.
If you lock/unlock the driver's door with a key, a driver’s door will lock/unlock automatically.
Copyright © 2024 www.hi30.net