Hyundai i-30: Rear Door / Rear Door Belt Outside Weatherstrip
Repair procedures
1. |
Pull down the rear door window glass to the lowest level by pressing
the power window glass switch.
|
2. |
Using a screwdriver or remover, remove the rear door belt outside weatherstrip
(A).
|
3. |
To install, reverse removal procedure.
• |
Replace any damaged clips.
|
|
|
Components and components location
Component Location
1. Rear door
latch
Repair procedures
Replacement
1...
Repair procedures
Replacement
1.
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
2...
Other information:
Components and components location
Components
Schematic diagrams
Circuit Diagram
Repair procedures
Inspection
•
When removing with a flat-tip screwdriver or remover, wrap protective
tape around the tools to prevent damage to components...
■ Front radar
■ Front camera
In order for the FCA system to operate
properly, always make sure the
sensor cover or sensor is clean and
free of dirt, snow, and debris. Dirt,
snow, or foreign substances on the
sensor cover or sensor may adversely
affect the sensing performance of
the sensor...
Categories
Speedometer
The speedometer indicates the
speed of the vehicle and is calibrated
in kilometers per hour (km/h) and/or
miles per hour (MPH).
Tachometer
read more