Hyundai i-30: Engine and Transaxle Assembly / Engine Room Under Cover

Hyundai i30 (PD) 2018-2025 Service Manual / Engine Mechanical System / Engine and Transaxle Assembly / Engine Room Under Cover

Repair procedures
Removal and installation
1.
Remove the engine room under cover (A).
Tightening torque :
3.9 - 5.9 N.m (0.4 - 0.6 kgf.m, 2.9 - 4.3 lb-ft)

2.
Install in the reverse order of removal.

    Engine Cover

    Repair procedures Removal and Installation 1. Remove the engine cover (A).    • To avoid damage, remove the engine cover on room temperature...

    Engine Mounting

    Components and components location Components 1. Transaxle mounting bracket 2. Roll rod bracket 3. Engine mounting bracket 4...

    Other information:

    Hyundai i30 (PD) 2018-2025 Owner's Manual: Recommended cold tyre inflation pressures


    All tyre pressures (including the spare) should be checked when the tyres are cold. “Cold tyres” means the vehicle has not been driven for at least three hours or has been driven for less than 1 mile (1.6 km). Warm tyres normally exceed recommended cold tyre pressures by 4 to 6 psi (28 to 41 kPa)...

    Hyundai i30 (PD) 2018-2025 Owner's Manual: EPB malfunction indicator


    This warning light illuminates if the Engine Start/Stop button is changed to the ON position and goes off in approximately 3 seconds if the system is operating normally. If the EPB malfunction indicator remains on, comes on whilst driving, or does not come on when the Engine Start/Stop button is changed to the ON position, this indicates that the EPB may have malfunctioned...

    Categories

    Turn signals and lane change signals

    Hyundai i30. signals

    To signal a turn, push down on the lever for a left turn or up for a right turn in position (A). To signal a lane change, move the turn signal lever slightly and hold it in position (B).The lever will return to the OFF position when released or when the turn is completed.

    read more


     
    Copyright © 2025 www.hi30.net