Hyundai i-30: Convenient features of your vehicle / Driver assist system
Rear View Monitor
■ Type A
■ Type B
■ 5 Door
■ Wagon
■ Fastback
The Rear View Monitor will activate
when the engine is running and the
shift lever is in the R (Reverse) position.
This is a supplemental system that
shows behind the vehicle through
the mirror or navigation display whilst
backing-up.
■Type A
The Rear View Monitor can be turned
off by pressing the ON/OFF button
(1) when the Rear View Monitor is
activated. Press the ON/OFF button
(1) once more to turn on the Rear
View Monitor when the engine is running
and the shift lever is in R
(Reverse).
WARNING
The Rear View Monitor display
is not a safety device. It only
serves to assist the driver in
identifying objects directly
behind the middle of the vehicle.
The camera does NOT cover
the complete area behind the
vehicle.
WARNING
- Never rely solely on the Rear
View Monitor display when
backing-up.
- ALWAYS look around your
vehicle to make sure there are
no objects or obstacles before
moving the vehicle in any
direction to prevent a collision.
- Always pay close attention
when the vehicle is driven close
to objects, particularly pedestrians,
and especially children.
NOTICE
- Do not spray the camera or its
surrounding area directly with a
high pressure washer. Shock
applied from high pressure
water may cause the device to
not operate normally.
- Do not use any cleanser containing
acid or alkaline detergents
when cleaning the lens.
Use only a mild soap or neutral
detergent, and rinse thoroughly
with water.
Information
Always keep the camera lens clean. The
camera may not work normally if the
lens is covered with dirt, water or snow.
The rear window wiper and washer
switch is located at the end of the
wiper and washer switch lever.
Turn the switch to the desired position
to operate the rear wiper and
washer...
The Parking Distance Warning
(Reverse) system assists the driver
during reverse movement of the vehicle
by chiming if any object is sensed
within the distance of 120 cm (50 inches)
behind the vehicle...
Other information:
Instrument panel illumination
When the vehicle's position lights or
headlamps are on, press the illumination
control button to adjust the
brightness of the instrument panel
illumination.
When pressing the illumination control
button, the interior switch illumination
intensity is also adjusted...
Components and components location
Components Location
1. Reat seat
latch [LH]
2. Reat seat
latch [RH]
Repair procedures
Replacement
[LH]
•
When prying with a flat-tip screwdriver or use a prying trim
tool, wrap it with protective tape, and apply protective tape
around the related parts, to prevent damage...
Categories
1. Driver’s front air bag
2. Passenger’s front air bag
3. Side air bag*
4. Curtain air bag*
5. Knee air bag*
6. Front passenger air bag ON/OFF
switch
read more