Hyundai i-30: Wipers and washers / Rear window wiper and washer
switch
The rear window wiper and washer
switch is located at the end of the
wiper and washer switch lever.
Turn the switch to the desired position
to operate the rear wiper and
washer.
2 – High wiper speed
1 – Low wiper speed
O – Off
Push the lever away from you to
spray rear washer fluid and to run the
rear wipers 1~3 cycles. The spray
and wiper operation will continue until
you release the lever. (if equipped)
Auto rear wiper (if equipped)
The rear wiper will operate whilst the
vehicle is in reverse with the front
wiper ON by selecting the function on
the LCD display.
Go to ‘User Settings → Convenience
→ Auto Rear Wiper (reverse)’.
This vehicle has a "hidden" wiper
design which means that the wipers
cannot be lifted when they are in
their bottom resting position.
1. Within 20 seconds of turning off the
engine, move the wiper lever down
and hold it to the position for
about 2 seconds until the wipers
move to the top wipe position...
Rear View Monitor
■ Type A
■ Type B
■ 5 Door
■ Wagon
■ Fastback
The Rear View Monitor will activate
when the engine is running and the
shift lever is in the R (Reverse) position...
Other information:
Specification
Item
Specification
Power source
3V
Operating temperature
-30°C to +75°C (-22°F to +167°F)
RF Modulation
FSK
LF Modulation
ASK
RF frequency
433...
Repair procedures
Inspection
Rear Wiper Motor
1.
Remove the connector from the rear wiper motor.
2.
Connect positive (+) battery cables to terminal 4 and negative (-) battery
cables to terminal 3 respectively...
Categories
Operating door locks from
outside the vehicle
Mechanical key
Turn the key toward the rear of the
vehicle to unlock and toward the front
of the vehicle to lock.
If you lock/unlock the driver's door
with a key, a driver’s door will
lock/unlock automatically.
read more