Hyundai i-30: Idle stop and go (ISG) system / To deactivate the ISG system, ISG system malfunction
To deactivate the ISG system
- Press the ISG OFF button to deactivate
the ISG system. Then, the
ISG OFF button indicator illuminates,
and the message "Auto
Stop System Off" appears on the
LCD display.
- Press the ISG OFF button again to
reactivate the ISG system. Then,
the ISG OFF button indicator turns
OFF.
ISG system malfunction
The ISG system may not operate:
When there is a malfunction with the
ISG sensors or the ISG system.
The followings occur, when there is
a malfunction with the ISG system:
- The auto stop indicator (
)
remains ON in yellow after blinking
for 5 seconds on the instrument
cluster.
- The light on the ISG OFF button
will illuminate.
Information
- When you cannot turn OFF the ISG
OFF button indicator by pressing the
ISG OFF button, or when the malfunction
with the ISG system persists,
we recommend that you contact
a HYUNDAI authorised repairer.
- You can turn off the ISG OFF button
indicator by driving over 50
mph (80 km/h) for up to 2 hours
with the fan speed below the 2nd
position. If the ISG OFF button
indicator remains ON, we recommend
that you contact a HYUNDAI
authorised repairer.
WARNING
When the engine is in auto stop
mode, the engine may restart.
Before leaving the vehicle or
checking the engine compartment,
stop the engine by placing
the ignition switch to the
LOCK/OFF position or removing
the ignition key.
Prerequisite for activation
The ISG system operates in the following
situations.
- The driver's seatbelt is fastened.
- The driver's door and the bonnet
are closed...
The battery sensor is deactivated,
when the battery is disconnected
from the negative pole for maintenance
purpose.
In this case, the ISG system is limitedly
operated due to the battery sensor
deactivation...
Other information:
Components and components location
Component Location
1. Rear door
latch
Repair procedures
Replacement
1.
Remove the rear door module.
(Refer to Rear Door - "Rear Door Module")
2...
Specifications
Specifications
Items
Blind-Spot Collision Warning (BCW)
Blind-Spot Collision- Avoidance Assist-Rear (BCA-R)
Rated voltage
DC 12V
Operating voltage
9V - 16V
Operating speed
20 km/h - 255 km/h
60 km/h - 200 km/h
Sensible distance
70m
Curvature radius
Start : More than 100m
Start : More than 625m
Stop : Less than 70m
Stop : Less than 588m
Frequency
24 GHz
Numbers
2EA
Items
Rear Cross-Traffic Collision Warning (RCCW)
Rear Cross-Traffic Collision- Avoidance Assist (RCCA)
Rated voltage
DC 12V
Operating voltage
9V - 16V
Operating speed
0 km/h - 10 km/h
Sensible distance
25m
Curvature radius
-
Frequency
24 GHz
Numbers
2EA
Items
Safe Exit Assist (SEA)
Rated voltage
DC 12V
Operating voltage
9V - 16V
Operating speed
0 km/h - 3 km/h
Sensible distance
25m
Curvature radius
-
Frequency
24GHz
Numbers
2EA
Schematic diagrams
Circuit Diagram
[5Door]
[Wagon]
[Fastback]
Repair procedures
Removal
1...
Categories
Opening the tailgate

■ 5 Door, Wagon

■ Fastback
read more