Hyundai i-30: Smart Key System / Specifications

Hyundai i30 (PD) 2018-2024 Service Manual / Body Electrical System / Smart Key System / Specifications

Specifications

Smart Key Unit

Items	Specification
Rated voltage	DC 12V
Operating voltage	DC 9 - 16V
Operating temperature	-22°F to 167°F (-30°C to 75°C)
Load	Max. 4mA (When welcome light function off)

RF Receiver

Items	Specification
Frequency	433.92 Mhz
Antenna type	FSK (Frequency Shift Keying)

Smart Key Fob

Items

Specification

Battery

Lithium battery 3V 1EA

Distance

30m from vehicle, RF : 30m, Passive(LF) : 0.7m

Battery life

More than 2 years (10 times / a day)

•	An inappropriately disposed battery can be harmful to the environment and human health.

•	Dispose the battery according to your local law(s) or regulation.

Push buttons

3 (Door lock / unlock, Tailgate)

Frequency(Rx)

125 kHz

Frequency(Tx)

433.92 MHz

Numbers

2EA

Antenna

Items	Specification
Rated voltage	DC 12V
Operating voltage	DC 9 - 16V
Operating temperature	-22°F to 167°F (-30°C to 75°C)
Frequency	125kHz
Numbers	Interior (2EA), Door (2EA), Bumper (1EA), Trunk (1EA)

Smart Key System

Components and components location

Component Location (1) 1. Smart key unit (SMK) 2. Interior antenna 2 3. Door outside handle / Door antenna 4...

Other information:

Hyundai i30 (PD) 2018-2024 Service Manual: In-car Sensor

Description and operation Description The In-car air temperature sensor is built in the heater & A/C control unit. The sensor contains a thermistor which measures the temperature of the inside. The signal decided by the resistance value which changes in accordance with perceived inside temperature, is delivered to heater control unit and according to this signal the control unit regulates in-car temperature to intended value...

Hyundai i30 (PD) 2018-2024 Service Manual: Description and operation

Description Emissions control system consists of the three major systems. • Crankcase emission control system prevents blow-by gas from going into the atmosphere. This system burns these gases after moving them to the intake manifold (Closed crankcase ventilation type)...