Hyundai i-30: Drive Belt System / Drive Belt Tensioner
Repair procedures
1. |
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
|
2. |
Remove the drive belt tensioner (A).
Tightening torque :
19.6 - 26.5 N.m (2.0 - 2.7 kgf.m, 14.5 - 19.5 lb.ft)
|
|
3. |
Install in the reverse order of removal.
|
Repair procedures
Removal and installation
1.
Remove the drive belt.
(1)
Release the tension of the drive belt by turning the drive belt
tensioner unclockwise...
Repair procedures
Removal and installation
1.
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
2...
Other information:
Description and operation
Description
The GDI injector is similar to a standard injector, but sprays fuel at a much
higher pressure directly into the combustion chamber and has a swirl disc to
get the fuel swirling as it exits the nozzle...
Important Safety Notice
Proper service methods and repair procedures are essential for safe, reliable
operation of all motor vehicles as well as personal safety of the operator.
The service procedures and descriptions in this shop manual provide general
directions for service and repair...
Categories
Operating door locks from
outside the vehicle
Mechanical key
Turn the key toward the rear of the
vehicle to unlock and toward the front
of the vehicle to lock.
If you lock/unlock the driver's door
with a key, a driver’s door will
lock/unlock automatically.
read more