Hyundai i-30: Multifunction Switch / Components and components location

1. Steering column
2. Multifunction switch
|
3. Screw
4. Clock spring
|


Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the steering wheel...
Other information:
Whilst driving a corner, for greater
visibility and safety, either the left or
right side static bending light will turn
on automatically. The static bending
light will turn on when one of the following
conditions occur.
Vehicle speed is less than 6 mph
(10 km/h) and steering wheel angle
is turned approximately 80 degrees
with the low beam on...
Settings available after engaging
parking brake / Settings
available after shifting to P
This warning message illuminates if
you try to select an item from the
User Settings mode whilst driving.
- Manual transmission
For your safety, change the User
Settings after engaging the parking
brake...
Categories
Seat belt warning
Driver’s seat belt warning

■ Instrument cluster
As a reminder to the driver, the seat
belt warning light will illuminate for
approximately 6 seconds each time
you turn the ignition switch ON
regardless of belt fastening.
read more