Hyundai i-30: Clutch System / Special service tools

Hyundai i30 (PD) 2018-2024 Service Manual / Clutch System / Special service tools

Special Service Tools

Tools (Number and Name)	Illustration	Use
09411-1P000 Clutch disc guide		Installation of the clutch disc.

Specifications

Specifications Engine Item Specification ALL Clutch operation method Hydraulic type Electronic type Clutch cover assembly type Diaphragm spring strap Clutch disc type Single dry with diaphragm Gasoline 1...

Troubleshooting

Other information:

Hyundai i30 (PD) 2018-2024 Service Manual: Integrated Thermal Management Module (ITM)

Components and components location Components 1. Herater pipe & hose 2. Intergrated Thermal Management Module (ITM) Repair procedures Removal and Installation Integrated thermal management module (ITM) • Make sure that static electricy and other voltages do not act on the integrated thermal management module (ITM)...

Hyundai i30 (PD) 2018-2024 Service Manual: RCV Control Solenoid Valve

Description and operation Description RCV (Recirculation Valve) Control Solenoid Valve is installed on the cooling pan motor top and operates the RCV actuator which controls the by-pass passage of the turbo-charger compressor. When the throttle valve is closed during engine running [Tip-out], crash noise of the impeller will occur because of rapid increasing of the boost pressure...

Categories

Panorama sunroof

If your vehicle is equipped with a sunroof, you can slide or tilt your sunroof with the sunroof control lever located on the overhead console.

Hyundai i30. Panorama sunroof

The ignition switch must be in the ON position before you can open or close the sunroof.

The sunroof can be operated for approximately 30 seconds after the ignition key is removed or turned to the ACC or LOCK(or OFF) position. However, if the front door is opened, the sunroof cannot be operated even within 30 seconds.