Hyundai i30 (PD): Maintenance
- Engine compartment
- Maintenance services
- Owner maintenance. Owner maintenance schedule
- Scheduled maintenance services
- Explanation of scheduled maintenance items
- Engine oil
- Engine coolant
- Brake/clutch fluid
- Washer fluid
- Parking brake
- Fuel filter (for diesel)
- Air cleaner
- Climate control air filter
- Wiper blades
- Battery
- Tyres and wheels
- Recommended cold tyre inflation pressures
- Check tyre inflation pressure
- Tyre rotation
- Wheel alignment and tyre balance
- Tyre replacement
- Wheel replacement, Tyre traction & maintenance
- Tyre sidewall labelling
- Low aspect ratio tyres
- Fuses
- Light bulbs
- Headlamp, static bending lamp, position lamp, turn signal lamp and daytime running light bulb replacement
- Front fog lamp
- Headlamp and front fog lamp aiming
- Side repeater lamp replacement
- Rear combination lamp bulb replacement
- Rear fog lamp
- High mounted stop lamp replacement
- License plate light bulb replacement
- Interior light bulb replacement
- Exterior care
- Interior care
- Emission control system
Your vehicle is equipped with emergency commodities to help you respond to emergency situation. Fire extinguisher If there is small fire and you know how to use the fire extinguisher, follow these steps carefully.
1. Engine coolant reservoir/ Engine coolant cap 2.Brake/clutch fluid reservoir 3. Air cleaner 4. Engine oil dipstick 5. Engine oil filler cap 6.
Other information:
Hyundai i30 (PD) 2018-2024 Owner's Manual: Check tyre pressure
You can check the tyre pressure in the Assist mode on the cluster. Refer to the "LCD Display Modes" in chapter 3. Tyre pressure is displayed after a few minutes of driving after initial engine start up. If tyre pressure is not displayed when the vehicle is stopped, "Drive to display" message will appear.
Hyundai i30 (PD) 2018-2024 Owner's Manual: Rear fog lamp
1. Loosen the pin-type retainers and screws of the rear wheel guard and then detach it from the rear bumper. 2. Reach your hand into the back of the rear bumper. 3. Remove the socket from the housing by turning the socket counterclockwise until the tabs on the socket align with the slots of the housing.
Categories
- Manuals Home
- Hyundai i30 Owners Manual
- Maintenance
- Maintenance services
- Engine coolant
- New on site
- Most important about car
