Hyundai i-30: Specifications & Consumer information / Engine number

Hyundai i30 (PD) 2018-2024 Owner's Manual / Specifications & Consumer information / Engine number

Hyundai i30. Engine number

Hyundai i30. Engine number

Hyundai i30. Engine number

The engine number is stamped on the engine block as shown in the drawing.

    Vehicle identification number (VIN), Vehicle certification label, Tyre specification and pressure label

    Vehicle identification number (VIN) ■ Frame number The vehicle identification number (VIN) is the number used in registering your vehicle and in all legal matters pertaining to its ownership, etc...

    Air conditioner compressor label, Refrigerant label, Declaration of conformity, Air conditioner compressor label

    A compressor label informs you the type of compressor your vehicle is equipped with such as model, supplier part number, production number, refrigerant (1) and refrigerant oil (2)...

    Other information:

    Hyundai i30 (PD) 2018-2024 Service Manual: RCV Control Solenoid Valve


    Description and operation Description RCV (Recirculation Valve) Control Solenoid Valve is installed on the cooling pan motor top and operates the RCV actuator which controls the by-pass passage of the turbo-charger compressor. When the throttle valve is closed during engine running [Tip-out], crash noise of the impeller will occur because of rapid increasing of the boost pressure...

    Hyundai i30 (PD) 2018-2024 Owner's Manual: Exterior lights


    Lighting control To operate the lights, turn the knob at the end of the control lever to one of the following positions: (1) O (OFF) position (2) AUTO light position (if equipped) (3) Position lamp position (4) Headlamp position AUTO light position When the light switch is in the AUTO position, the position lamp and headlamp will be turned ON or OFF automatically depending on the amount of light outside the vehicle...

    Categories

    Turn signals and lane change signals

    Hyundai i30. signals

    To signal a turn, push down on the lever for a left turn or up for a right turn in position (A). To signal a lane change, move the turn signal lever slightly and hold it in position (B).The lever will return to the OFF position when released or when the turn is completed.

    read more


     
    Copyright © 2024 www.hi30.net