Hyundai i-30: Fuses And Relays / Components and components location
[Engine Room]
1. Engine room
junction block
|
|
[Interior Relay]
1. Smart junction
block (SJB)
|
2. ICM relay
block
|
Components and components location
Component Location
[Engine room junction block]
E/R Junction Block
Circuit (E/R Junction Block)
[Metal Core Block (PCB)]
PCB Block
Circuit (PCB Block)
Repair procedures
Inspection
1...
Other information:
Repair procedures
Inspection
Check if the auto light control operates like a timing chart shown below. Tail
lamp output and head lamp (Low) output is controlled based on the auto light
sensor's input (illumination intensity) when the Auto Light Switch in Multi-Function
Switch is turned ON, and the vehicle is in IGN1 or IGN2 ON Mode...
Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
If it is necessary to remove multifunction switch assembly, remove the
steering wheel.
(Steering System - "Steering Wheel")
3...
Categories
When the High Beam Assist (HBA)
System is not working properly, the
warning message will come on for a
few second. After the message disappears,
the master warning light ()
will illuminate.
read more